Steel Bar/Rebar Flash Butt Welder

Product Description

Typical Applications:
1.All kinds of dinnerware, cooking knives and table knives;
2.Bicycle rim, motorbike rim, car rim, or similar strip rings;
3.Various metal wire and steel strip, construction steel bar and rebar;
4.Round,Square and Rectangular tubes welding into "L" or "T" shape;
5.Mitre welding of door and window frames.
 
The Main Principle of Flash Butt Welding: 
1.The flash butt process starts when the two workpieces to be welded which are clamped by welding jams still not meet each other.
2.During the subsequence,move the welding jaws together slowly,the welding current density will increase,then the metal material in the gap between the jaws becomes molten,at the same time a shower of sparks also being emitted.
3.As the cross-sectional area in the welding becomes extremely hot,the motion is accelerated.
4.The flashing also makes the surfaces to welded together totally.
5.Finally the upset occurs at high pressure,the welding current is cut off.
 
Main Technical Parameter:

Parameter	Rated Power	Rated Voltage	Rated Frequency	Max Short Current	Rated Duty Cycle	Max Clamping Force	Max Upsetting Force	Cooling Water Required	Average Weight	Over Dimensions L*W*H
Model No.
UN-50	50KVA	380V/420V	50/60Hz	19000A	50%	4000N	2000N	150L/H	350Kg	100*90*150CM
UN-75	75KVA	380V/420V	50/60Hz	24000A	50%	6500N	3000N	150L/H	450Kg	100*90*150CM
UN-100	100KVA	380V/420V	50/60Hz	28000A	50%	6500N	3000N	150L/H	550Kg	100*90*150CM
UN-150	150KVA	380V/420V	50/60Hz	32000A	50%	8500N	4000N	300L/H	1200Kg	140*100*170CM
UN-200	200KVA	380V/420V	50/60Hz	37000A	50%	8500N	4000N	300L/H	1400Kg	140*100*170CM
UN-250	250KVA	380V/420V	50/60Hz	45000A	50%	12000N	6000N	600L/H	1600Kg	180*120*190CM
UN-300	300KVA	380V/420V	50/60Hz	52000A	50%	12000N	6000N	600L/H	1800Kg	180*120*190CM