Automatic Wire Straightening and cutting Machine
Main Features and Applications
1) The equiment is mainly used for automatically straighten round or flat wire, stainless steel wire, galvanzed wire, aluminum wire, and cut automatically according to the preset length.
2) There are two kinds if models: Traditional Mechanical Model and Numerical Control Hydraulic Model.
3) Traditional Mechanical Model Atomatic Wire Straightening and Cutting Machine, need to set the straightening and cutting length manually, then the machine will do that automatically.
Opetation and maintenance are simple. It is mainly used for straightening and cuttting the wire with diameter less than 10mm and the maximum cutting length is less than 2 metres.
4) Numerical Control Hydraulic Model Automatice Wire Straightening and Cutting Machine, processing performance is strong, almost can process any diameter, any length of wire, high degree of automation, automatically set straightening and cutting length , adopted with the safety device and automatic counting & stop system. Mainly used for Straightening and cutting building cold-rolled steel wire and rebar, hot-roll steel wire, hot-rolled round steel wire and cold-rolled steel bar etc.
Main Technical Parameter
Parameter/
Model |
Traditional Mechanical Model |
Numerical Control Hydraulic Model |
| SC0.8-2.5 |
SC2-5 |
SC5-9 |
SC9-12 |
SC4-12 |
SC6-14 |
SC8-16 |
| Wire Diameter |
0.8-2.5MM |
2-5MM |
5-9MM |
9-12MM |
4-12MM |
6-14MM |
8-16MM |
| Max Cutting Length |
0-1000MM |
0-2000MM |
0-2000MM |
0-2000MM |
0-2000MM |
0-2000MM |
0-2000MM |
| Straightrening Speed |
15-22M/Min |
1-24M/Min |
16-24M/Min |
16-26M/Min |
20-50M/Min |
20-60M/Min |
20-70M/Min |
| Motor Power |
0.55+0.55KW |
0.55+1.55KW |
1.5+5.5KW |
2.2+7.5KW |
3+3+1KW |
4+4+11KW |
5+5+12KW |
Audited Supplier 
){kind=link}